Output Type: | AC Three Phase |
---|---|
Number of Blade: | Multiple-Blade |
Rotating Shaft: | Vertical |
Stress Way of Blade: | Resistance |
Power: | <10kW |
Phase: | Two Phase |
Samples: |
---|
Suppliers with verified business licenses
1. Prepare all accessories as picture shows;
|
2.Tighten all 5 pairs of bolts with hex wrench; | 3. When finished, like the picture shows above; |
4. Connect three output wires of wind generator With transmission line, lines splicing length should longer than 30mm, insulating tape fasten at 100mm of coupling end;
|
5. Connect generator flange with tower flange, put in Bolts with elastic washer and flat washer, then tighten anti-loose bolts;
|
6. Connect battery cables to controller firstly, then connect the wind turbine lead wire to controller terminal.
|
FC Series Wind Turbine Generator | ||
Technical Parameters | Model No. | FC300 |
Rated Power (W) | 300W | |
Rated Voltage (V) | 12/24v | |
Rotor Diameter (m) | 0.8 | |
Height of rotor(m) | 0.6 | |
Star-up Wind Speed (m/s) | 2.5 | |
Rated Wind Speed (m/s) | 11 | |
Safety wind speed(m/s) | 45 | |
RMP (r/min) | 800 | |
Shell Material | Die-cast Aluminum | |
Blade Material | High-strength Nylon Composite | |
Blade Number | 5 pcs | |
Motor Type | Three - phase rare earth permanent magnet alternator | |
Yaw model | Electromagnetic brake | |
Output frequency | 50Hz | |
Certification | CE / ISO9001:2008 / GMC | |
Package | Package Weight (KG) | 14.5 |
Package Size (mm) | 610*440*300 | |
Packing | Carton and Foam |
Suppliers with verified business licenses